What are decorative columns?
A Decorative column as referred to by Cabinets Online is a base feature column that is constructed of profiled panels to form a decorative column on the end of island benches in 2pac (and sometimes vinyl) kitchen applications. The column is built in our factory and sent to site in one piece. There are some variations on how to build and order these columns. See the images below for the type of column you are after and how to order.
The first step is to make sure you have styled in all panels you intend to use to make the columns.
Once you have selected your styles Click on "Add Cabinet/Panel
1. Click on Base
2. Click on Panels and Fillers
3. Click on Built up single column.
Add in your dimensions
1. you will need to specify the material for each part (usually the build ups are in 18 or 21 mm white satin)
2. Then you will need to specify the dimensions of each part. (see below for reference)
Below is an example of the accurately filled out dimensions of the figure above.
Click on Add Cabinet/Panel
1. Click on Base
2. Click on Panels and Fillers
3. Click on Built up single column.
Add in your dimensions
You will need to remove the build up panels
1. click on the menu bar on the right hand side of each build up panel
2. select remove
3. you will need to adjust the dimensions of the remaining parts.(refer to the images below )
Below is an example of the accurately filled out dimensions of the image above.
The first step is to make sure you have styled in all panels you intend to use to make the columns.
Click on Add Cabinet/Panel
1. Click on Base
2. Click on Panels and Fillers
3. Click on Built up Double column.
Fill out the dimensions of the column.
1. you will need to specify the material for each part (usually the build ups are in 18 or 21 mm white satin)
2. Then you will need to specify the dimensions of each part. (see below for reference)
Below is an example of the accurately filled out order for the images above.
Click Add Cabinet/Panel
1. Click on Base
2. Click on Panels and Fillers
3. Click on Built up Double column.
Fill out the product dimensions.
1. Remove build up panels by clicking on the menu bar to the right hand side and selecting remove.
2. add in the desired dimensions for the rest of the cabinet parts. (see below for reference)
