As standard Polytec vinyl Panels are single sided, so are ordered as a door and as such will have either a white or black backing (depending on the colour of the doors). To avoid seeing a white or black backing on the inside of a panel a "Return Panel" can be ordered.
Please note Return Panels have an EM/0 edge mold on the return section that cannot be altered.
See below for how to order.
As the image above shows Return Panels can be returned on 1 or 2 edges and in 18, 21 36 or 42mm.
To order a Return Panel correctly you must include the total panel size, that is the depth of the panel plus the width of the panel plus the return depth.
Example if you want a 600 deep panel in 18mm board returned 100mm you need to enter the overall size at 600+18+100=718 and add in the Fabrication charge. See below for how to add the fabrication charge.
- Click on the Panel Menu Bar
- Select Add Modification
Select Polytec - Panel Options
Select the appropriate Fabrication charge
RP1 = 1 Return
RP2 = 2 Return